Main Feature
Easy to Use
The V-Mixer is designed to be fast and intuitive to use for the beginner or the experienced professional. It features dedicated knobs and buttons for all console functions, 24 touch-sensitive moving faders, onboard Help, large - bright TFT LCD display and Cat5e connectivity for low cost installation and truly portable systems.
Outstanding Sound Quality
The M-400 is a complete digital solution maintaining 24-bit audio from the stage to the splits and back to the stage. Preamps on stage provide the highest possible sound quality and intelligibility. Cat5e snake eliminates the high frequency losses inherent in analog snakes. Onboard digital processing, channel DSP and routing eliminate any chance for buzzes from extra cabling and analog to digital conversion losses. Built-in 24-bit recording provides lossless capture of live events. The Digital Split allows lossless transmission to monitoring, recording or broadcast positions. Bus and Main LR return over Cat5e enables a complete digital signal path back to the stage.
Powerful Digital Benefits
Instantly change from event to event with 300 Scenes for total recall of all mixer, effect and routing parameters. Password level access provides only the relevant controls for any particular type of user. PC software allows loading/saving setups as well as real-time control. Libraries provide the ability to for storing custom channel, patchbay and effect settings. Direct to PC recording over Cat5e enables up to 40 channels of direct digital recording.
- Configurable digital snakes with high quality, remotely controlled mic preamps on stage;
- Cat5e distribution that is light weight, low cost and without the high frequency losses inherent in analog snakes;
- A 48-channel M-400 Mixing Console with 16 buses, channel and bus DSP, 4 stereo FX processors, 4 graphic EQs, built-in stereo recording and playback, and built in multi-channel split port;
- Up to 40 channels of limitless digital splits over Cat5e for monitor/broadcast positions and/or PC recording without any audio interfaces; and
- Up to 16 returns to stage over Cat5e cable.
Easy to Use
The V-Mixer is designed to be fast and intuitive to use for the beginner or the experienced professional. It features dedicated knobs and buttons for all console functions, 24 touch-sensitive moving faders, onboard Help, large - bright TFT LCD display and Cat5e connectivity for low cost installation and truly portable systems.
Outstanding Sound Quality
The M-400 is a complete digital solution maintaining 24-bit audio from the stage to the splits and back to the stage. Preamps on stage provide the highest possible sound quality and intelligibility. Cat5e snake eliminates the high frequency losses inherent in analog snakes. Onboard digital processing, channel DSP and routing eliminate any chance for buzzes from extra cabling and analog to digital conversion losses. Built-in 24-bit recording provides lossless capture of live events. The Digital Split allows lossless transmission to monitoring, recording or broadcast positions. Bus and Main LR return over Cat5e enables a complete digital signal path back to the stage.
Powerful Digital Benefits
Instantly change from event to event with 300 Scenes for total recall of all mixer, effect and routing parameters. Password level access provides only the relevant controls for any particular type of user. PC software allows loading/saving setups as well as real-time control. Libraries provide the ability to for storing custom channel, patchbay and effect settings. Direct to PC recording over Cat5e enables up to 40 channels of direct digital recording.
Specifications
Main Specifications
V-Mixer M-400 Specifications | |
PROCESSING | |
Channels | 48 inputs / 18 buses |
Signal Processing | 56-bit |
AD/DA Conversion | 24-bit / 44.1kHz or 24-bit / 48kHz |
Network Latency |
2.8 ms (typical) |
CONNECTORS | |
XLR Inputs (1 to 8 ) | XLR-3-31 type (balanced with phantom power) |
Talkback Mic Input | XLR-3-31 type (balanced with phantom power) |
RCA Inputs (L/R) | RCA Pin Type |
XLR Outputs (1 to 8) | XLR-3-32 type (balanced) |
Phone Output | Stereo 1/4 inch phone type |
Digital Outputs | Optical type x 1 and Coaxial type x 1 |
REAC Ports | RJ-45 EtherCon type x 3 |
USB Ports | A type x 1 and B type x 1 |
Remote Connectors | RS-232C (D-Sub 9 pin type) x 1* MIDI (5 pin DIN type) x 2 (Out/Thru & In) * Serial remote control is not available on version 1 firmware |
Other Connectors | LAMP (XLR-4-31 type) x 1, Grounding terminal, AC Input |
INPUT / OUTPUT CHARCTERISTICS | |
Frequency Response | XLR output jacks (1 to 8) : -2 dB / +0 dB (20k ohms load, +4 dBu) Phones jack: -3 dB / +0 dB (40 ohms load, 150 mW) |
Total Harmonic Distortion + Noise | XLR output jacks (1 to 8): 0.05 % (typical), Phones jack: 0.05 % (typical) |
Dynamic Range | XLR output jacks (1 to 8): 110 dB (typical) |
Cross Talk@1kHz | XLR input jacks (1 to 8): -80dB (Pad: ON, Input gain: +10 dBu, typical) XLR output jacks (1 to 8): -100 dB (typical) |
Nominal Input Level (Variable) | XLR input jacks (1 to 8): -65 to -10 dBu (Pad: OFF) or -45 to +10 dBu (Pad: ON) RCA input jacks (L/R): -18 to 0 dBu Talkback input jack: -50 to -10 dBu |
Input Impedance | XLR input jacks (1 to 8): 14 k ohms, RCA input jacks (L/R): 10 k ohms, Talkback input jack: 41 K ohms |
Non Clip Maximum Input level | XLR input jacks (1 to 8): +8 dBu (Pad: OFF) or +28 dBu (Pad: ON), RCA input jacks (L/R): +18 dBu, Talkback input jack: +8 dBu |
Nominal Output Level | XLR output jacks (1 to 8): +4 dBu (Load impedance: 10 k ohms) |
Output Impedance | XLR output jacks (1 to 8): 600 ohms, Phones jack: 100 ohms |
Recommended Load Impedance | XLR output jacks (1 to 8): 10 k ohms or greater, Phones jack: 8 ohms or greater |
Non Clip Maximum Output level | XLR output jacks (1 to 8): +22 dBu (1 kHz, 10 k ohms load) Phones jack: 150 mW + 150 mW (1 kHz, 40 ohms load) |
Residual Noise Level (IHF-A, typical) | -88 dBu (All faders : Min) |
Equivalent Input Noise Level (E.I.N.) | -126 dBu |
OTHER | |
Display | 800 x 480 dots Wide VGA backlit TFT full color |
Power Supply | AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) |
Power Consumption | 95 W |
Dimensions | 749.0 (W) x 626.0 (D) x 229.0 (H) mm 29-1/2 (W) x 24-11/16 (D) x 9-1/16 (H) inches |
Weight | 19.8 kg, 43 lbs 11 oz |
* When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependent upon the specifications of the splitting device, (0dBu=0.775Vrms) though the maximum delay amount for a single splitting device should be about 200 microseconds.
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. |